|
|
|
| PVC jacketing compounds (PLTC, AWM, Plenum,
CATV), general purpose extrusion, automotive molding, and insulation (AWM, CMR, TW, THW, THHN). All compounds listed
below are lead-free, stabilized PVC compounds.
|
| Application areas include general purpose wire and cable,
general extrusion and molding, telecommunications wire, building wire, and wet electrical insulation applications. |
| General Purpose Wire and Cable |
| 13820 | 82A | 1.41 | 350 |
Sunlight resistant insulation compound for TW and 75°C Class 43 applications. |
| 13880 | 88A | 1.40 | 335 |
TW 60°C; 60°C oil. 75°C Class 43; 720 hour sunlight resistant. |
| 1522 | 70A | 1.31 | 450 |
Vinyl elastomer jacket compound. |
| 15642 | 60D | 1.34 | 300 |
Semi-rigid insulation compound for Style #1061 applications. Maximum service temperature of 105°C. |
| 16900 | 92A | 1.41 | 300 |
Tray cable jacket; 720 hour sunlight resistance. |
| 69148 | 88A | 1.39 | 330 |
Tray cable jacket; 720 hour sunlight resistance. |
|
| Building Wire |
 |
|
| 13870 | 87A | 1.36 | 340 |
Sunlight resistant insulation compound recommended for TW and 75°C Class 43 applications. |
| 15900 | 90A | 1.33 | 330 |
Insulation compound recommended for TW and 80°C Class 43 applications. |
| 17890 | 89A | 1.32 | 340 |
Insulation compound recommended for THW and 90°C Class 43 applications |
| 19481 | 95A / 48D | 1.34 | 340 |
105°C, VW-1 insulation. Best suited for small guage, 1/64 wall applications.
UL approved for TW, THW, THHW, THHN-THWN insulation. |
| 19920 | 92A | 1.33 | 330 |
105°C insulation compound recommended for THHN-THWN circuit sizes.
Well suited for 105°C; 1/64 wall in all AWG sizes. CSA approved for FT1 TWN75, TEW and AWM IA constructions. |
| 19900 | 91A | 1.32 | 330 |
105°C; VW-1 insulation with good flexibility. Ideally suited for 1/64 wall
(18 AWG and larger). UL approved for TW, THW, THHW applications. |
| 19940-03 | 94A | 1.37 | 325 |
THHN-THWN circuit sizes. Best suited for 1/64 wall, 18 AWG and smaller. |
| 67441 | 71A | 1.37 | 350 |
90°C rated, inner / outer jacketing compound meets -40°C low temp
impact and FT4 flame requirements in Teck 90 cables. Low acid gas 12% - 13% per CSA test methods. |
|
| Extrusion / Molding |
 |
|
| 113B-FR | 90A | 1.25 | 340 |
105°C rated injection molding compound. Rated 94Vo at 1.50 mm and 94V1 at 0.58 mm. |
| 11701 | 70A | 1.39 | 350 |
Matte finish extrusion compound recommended for speaker wire and other general
purpose extrusion applications. |
| 124C | 65D | 1.46 | 240 |
60°C injection molding, plug stock compound. UL approved for 94HB applications. |
| 8808 | 80A | 1.36 | 325 |
105°C flexible PVC compound formulated for UL94 V2 in all colors. Formulated
for sunlight resistance. |
|
| Coax / Telecom |
 |
|
| 12770 | 77A | 1.34 | 350 |
CATV and general purpose jacket with excellent low temperature properties. |
| 12880 | 91A | 1.45 | 330 |
VW-1 coax cable jacket; RG 6. |
| 16881 | 88A | 1.35 | 300 |
90°C rated, jacket compound. Excellent low temperature properties. Suitable for riser and
optical fiber constructions. |
| 22840 | 84A | 1.50 | 300 |
Category 5, flexible CMR jacket at 28 - 30 mils over HDPE inners. |
|
|
|